Insert assembled templet between Iocknuts, item 7, and knurled nuts, item 6. Please make certain that the person who is to use this equipment carefully reads and understands these instructions before starting operations. Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. Do not let visitors contact tool or extension cord. Join Date: Oct 2008. This package includes a template for half-blind, rabbeted half-blind, and sliding dovetails, and a template for through dovetails and box joints. Attach templet, item 11, to templet brackets, item 4, with templet retaining screws, item 3. Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Request, and follow, any safety information available from your material supplier. Take extra care to prevent inhalation and skin contact when working with these materials. 4.Thread on knurled nuts, item 6, on bolts, item 14 up to the locknuts and tighten firmly. Do not use tool in presence of flammable liquids or gases. 15.REMOVE ADJUSTING KEYS AND WRENCHES. Do not wear loose clothing or jewelry. when plugging in the tool. There are certain applications for which this tool was designed. 3.GUARD AGAINST ELECTRIC SHOCK. 1.Remove templet from Dovetail Fixture/Jig. Tools & Home Improvement ... PORTER-CABLE Dovetail Jig with Mini Template Kit (4216) 4.7 out of 5 stars 1,016. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this instruction manual. Record these numbers in the spaces below and retain for future reference. Do not tighten at this time. 2.Loosen edge guide retaining screw, (item 15, Fig. Thread on knurled nuts, item 6, on bolts, item 14 up to the locknuts and tighten firmly. Watch what you are doing. Once the templet and router have been set up to rout a satisfactory dovetail joint, any number of joints can be made. 2. 19.CHECK DAMAGED PARTS. NOTE: Refer to Fig. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Wear safety glasses or goggles while operating power tools. 1.Arrange the drawer front and side pieces as shown in Fig. Keep hands, body and clothing clear of blades, bits, cutters, etc. Remove templet from Dovetail Fixture/Jig. The Model and Serial No. Do not operate tool when you are tired or while under the influence of medication, alcohol or drugs. Use clamps or a vise to hold work. 13.MAINTAIN TOOLS WITH CARE. PORTER-CABLE Dovetail Jig, 12-Inch (4210) 4.6 out of 5 stars 210. Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in property damage. 5.STORE IDLE TOOLS. 7.USE RIGHT TOOL. 10.SOME WOOD CONTAINS PRESERVATIVES WHICH CAN BE TOXIC. 7.BE SURE MOTOR HAS COMPLETELY STOPPED before removing router from Dovetail Fixture/Jig and setting Dovetail Fixture/Jig down between operations. Keep tools sharp and clean for better and safer performance. This manual contains information that is important for you to know and understand. 2.SECURE WORK. 2.AVOID DANGEROUS ENVIRONMENT. 1 for the various parts of the Model 4112 Dovetail Fixture/Jig. 5.MAINTAIN FIRM GRIP on router when starting motor to resist starting torque. We have emailed you a verification link to, strongly recommends that this tool NOT be modified and/or used for any application other than for which it was designed. The completely assembled Dovetail Fixture/Jig should be securely mounted to a sturdy bench or stand to prevent movement during routing operations. Form habit of checking to see that keys and adjusting wrenches are removed from the tool before turning it on. 4.KEEP HANDS CLEAR of cutter when motor is running to prevent personal injury. Thread locknuts, item 7, on bolts, item 14 up to the jam nuts and tighten firmly. A single purpose half-blind dovetail jig like the PC 4112 makes sense for those who want to make drawers and boxesemploying half-blind dovetails without a lot of fuss. 1) and slide edge guide to drawer front and secure in place. 14.DISCONNECT TOOLS when not in use, before servicing, and when changing accessories such as blades, bits, cutters, etc. 6A.To install front clamp bar item 10, place washers item 16 (used on front bar only) on bolts item 17. These later jigs have cast iron bases and cam operatedclamp bars. – any latin characters (a-z, A-Z)– any numbers (0-9)– special characters ("-", "_" and "."). NOTE: Ends of front and side pieces must be cut square with the length of the pieces to produce good dovetail joints.